Step 1.
Disconnect the battery and reed switch before installation.
STEP 2.
Remove the propeller shroud
STEP 3.
Unscrew the bracket with the magnetic wheel.
STEP 4.
Screw the T-bracket to the housing (using the original screws (bracket for SS) or the included ones (bracket for Gavin).
STEP 5.
Screw the propeller shroud (new screws are included for the T-handle).
STEP 6.
Remove the original reed switch.
STEP 7.
Install the new reed switch included in the kit. Screw the screw with the seated reed switch into the scooter housing with feeling.
STEP 8.
Reconnect the wires of the reed switch.
STEP 9.
With extreme care, connect the power supply to the scooter and test the operation.